Lightweight LS Engine Dummy Block Mock-Up Kit, Long Block

Description

Compatible with all LS engine bolt-ons such as intake manifolds, headers, oil pan, timing cover, water pump, and accessory brackets which makes positioning or fabricating engine mounts a breeze, Weighing in at 18 pounds for the short block or 35 pounds for the long block, this LS mock up engine can be lifted in and out of the vehicle by one person without the need for an engine hoist, Replicates all Gen 3 and Gen 4 LS block size for test fit of LS1, LS2, LS3, LS6, LS7, LSA, and Vortec truck engines 4.8L, 5.3L, 6.0L and 6.2L, Heavy duty 12 gauge steel construction is designed to last unlike the LS foam block which often suffers damage from thread inserts pulling out of the foam core, Long block version comes with bolt on fabricated steel mock up heads | Short block version accepts all facto
Lightweight LS Engine Dummy Block Mock-Up Kit, Long Block
Sku # 91089660-LONG
Mfr. Part # 91089660-LONG
Condition
New
Brand
Speedway Motors
Sold
Each
Details
Info
12-gauge steel construction is strong, durable, and lasts unlike foam/plastic versions
Accepts all LS bolt-on parts (exhaust, intake, oil pan, etc.) to confirm engine fit
Available in short block and long block mock up engine configuration
Short block version weighs 18 pounds and accepts stock or aftermarket LS cylinder heads
Long block version weighs 35 pounds and includes steel fabricated mock up heads
Complete long block weighs only 6 pounds more than popular foam versions
Easily lifted and set into place by hand without engine hoists or additional help
Can be used to mock up any LS engine, including LS car and Vortec truck engines
Crankshaft pulley spacing dimensions laser etched on front face for quick visual access
Long block cylinder head mock up panels are adjustable for standard LS vs LS7 heights
Ships and can be stored flat with simple assembly/disassembly steps
All hardware included for assembly of short or long block versions
Customer supplied head bolts and accessory bolts required to add parts to mock up
Test Fit Your LS Swap Quicky and Easily Without the Need for An Actual Engine
LS engine swaps are THE thing these days. We’re seeing them in everything from traditional first gen Chevy V8 applications like classic Camaros and Chevelles, to imaginative installations in Porsche 911s, the Tesla Model S, and much more. While those first gen Chevy V8 fitments are the easiest with the installation only requiring , it is still beneficial to have the LS engine in place for mocking up everything from air induction tubing to custom header fabrication, and more. It is even more critical for those crazy one-off swaps to have a block in place to confirm driveline angle when using custom , engine placement to clear the radiator and firewall, and more.
Traditionally, building something with an engine that was never meant to be installed in it would require an engine hoist, an actual engine, and a spotter or two keeping things in check while measurements were taken, parts tack welded, and so forth. It’s not an easy or quick process, and it can be dangerous with a 400 plus pound engine dangling on a chain over your hands (or head!). Though “this is the way” may work for the Mandalorian, for us here on Earth there is a better way, and that is with the Speedway Motors steel LS mock up engine block.
Laser Cut Steel Plate for Strength, Simplicity, and Easy Storage
Even if you have your LS engine all apart down to the bare block, that bare casting is still a couple of hundred pounds to try and roughly move into place to figure out your engine mounts, headers, and more on your project. Using replica engines to mock up your LS swap for your project is much safer and your back will thank you for your efforts.
Past mock up options included a plastic engine block or foam engine block, which, while being light and easy to maneuver, these plastic engines often did not hold up well to repeated usage or the installation of heavy components like long tube headers. This is why we designed our LS mock up block system from laser cut 12-gauge steel with all accessory mounting holes accessible from the back side for simple “nut and bolt” assembly of your accessories for engine mock up. No more thread inserts that work their way out of the foam engine block material or even needing the factory hardware during the mock up phase. Just grab yourself any fastener of the proper length and diameter, saving the good installation hardware for final assembly.
Furthermore, our LS engine mock up block, which is available in short block and long block options, ships unassembled, saving you shipping costs and storage room when not in use. Simply assemble the mock up pieces following the provided instructions with the fasteners included and your mock up engine block is ready to use in minutes. Disassemble it for storage where it will easily fit under a workbench, on a shelf or other location that a full size plastic engine block or real engine block wouldn’t fit or have the weight capacity to handle (ever try storing a real engine block on a plastic shelf?).
Our steel LS mock up block weighs in at just 18 pounds for the short block and 35 pounds for the long block (that’s only six pounds heavier than the foam engine block version we mentioned), making it easy to handle and position all by yourself safely in the engine bay of your project. If you opt for the long block version the included 12-gauge steel cylinder heads provide mounting locations for your intake manifold, exhaust manifolds or headers, and even your valve covers.
This allows the complete mockup of an assembled and dressed engine, right down to ignition coils and more to confirm fitment, clearances, plumbing and wire routing, and so much more easily. Even if you’re just using the short block, you can confirm fitment and engine location by mounting an , timing cover, water pump, and accessory brackets to our mock up block easily. The short block also accepts all stock and aftermarket LS cylinder heads as well, so feel free to bolt up your actual cylinder heads for your mock up duties if you like!
Replicates All LS Engine Platforms to Mock Up Fitment of Any LS Engine
We did all the homework for you when designing our new steel LS mock up engine block assembly. We have provided all mounting holes to replicate the engine block and heads of all Gen III and Gen IV LS engines. Whether it is the original LS1 or you’re planning for an LS6 or LS7, or perhaps you scored a Vortec series truck engine on the cheap, no matter what LS series or generation it is our steel mock up block system will work for your mock up needs.
Due to the variances in LS platforms, there are differences in the accessory drive spacing. There are three different spacing dimensions (measured from the front of the block) and you need to adhere to these measurements when choosing which accessory drive you are planning to use, especially if you’re keeping the factory components from a used engine or a crate engine that is using stock components. Therefore, we made it easy on you by simply engraving these dimensions right on the front face of the mock up engine block.
Now you can quickly and easily confirm you have enough clearance to radiator cooling fans, power steering rack, fluid reservoirs, and other items commonly found at the front of the engine compartment. Note that we offer that can move the engine up to 3-inches total adjustment fore and aft to assist with accessory drive clearance.
So, whether you plan for a sole LS swap in your home garage, or your hot rod shop is looking for an easier way to make LS swaps happen in your customer’s cars, our bolt together steel LS mock up engine block will help you get the job done safely and quickly.
Charts
See our for more tips and info on making your LS swap project a success!
Not sure if your LS is a Gen III or Gen IV, Our will help you determine just what you have!
Installation Tips
The special M11 nuts included are only to be used when installing real cylinder heads to the mock up short block
Cylinder head bolts are not supplied, when mounting real cylinder heads you must use your stock or aftermarket bolts to mount
The mock up cylinder heads included in the long block option have an adjustable valve cover height to simulate LS7 cylinder heads vs all other LS heads
All included hardware is metric, including M6 and M8 bolts and nuts for the short block and additional M8 and M10 for the long block option
To resist flash rusting we recommend coating the steel sections in a light coat of WD-40 or other product, or they can be clear powder coated or clear painted
Specs
Material Type
Steel
Sold in Quantity
Kit
Weight
35
MFG. Part #
91089660
Related Items / Suggested Parts
Mock Up Turbo Fit Simulator Hot/Cold Side Welding Jig, T4 Flange
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 70 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.